Dunk

Location:	Lebanon, TN, USA
Joined:	11/23/2007

My Styles

Hot Rodder, Build-It, Drive-It, H.A.M.B.

My Crew 5

MAIN

(10139 Views)

November 23, 2007

How-To & Tech

Headers after the Nitro Plate people did a beautiful job coating them with their Ceramic coating

Carbs and Esslinger manifold. I wanted a Bosch coil, but all I could find was a Bush

did all the wooding myself and glued it in with Bondo. The seat lifts up for access to the battery and wiring

I built the rear deck. Painted it with the same TSC Ford Tractor Red Spray cans..........came out pretty good.

Page(s) 1 2 3 ... 13 | Next | Last

Ride Specs & Info

Ride Nickname:
The T

Make:
Ford

Model:
Model T

Year:
1923

Introduction / Overview:

I built this car myself, so if you see any mistakes, you can just blame me. Still working on it right now. I plan to get it on the road in the spring of 08. I even made the steering wheel and radius rods.

Drivetrain:

1978 Ford Pinto engine is bone stock with and Esslinger manifold and IDF Weber Carbs. I got into an arm wrestling match with Jerry Stahl and beat him 2 out of three so he would custom build me a set of headers. I had to weld them up but he bent up the tubing. It's got a C-3 trans and a 74 Ford Maverick 8 inch rear end. I even cut the drive shaft myself. The radiator is a 65 Mustang V8 with air one I got from O'Riley's Auto Parts. The front axle is a Model A I found at a yard sale for 15.00 dollars. The front brakes are Superbell with Metric calipers and Dodge rotors on 37-41 Spindles from Speedway. I built the radius rods myself from 7/8 DOM tubing using the Total performance design.

Chassis:
I built the chassis myself with an old Lincoln AC buzz Box welder out of 2X3 rectangular tubing. It tapers from 23 1/2 inches in the front to 30 inches at the rear. There was a reason for doing that..........I won't get into it now. I used deminsions from Total Performance, Speedway, and CCR and mixed them all up to get what I have. Total performance rear shock mounts and Speedway front spring perch. Front Spring is a TSC trailor spring with two leaves removed. I built the transmission crossmember the radius rod mounts and the motor mounts. I was given a Corvair steering box and got a stainless steel steering column from Speedway for Christmas last year...(What a good Wife)

Wheels:

5 x 15 front Smoothies from Coker in the front with Goodyear tires. Rear is going to be 8 inch smoothies from Coker as well. I haven't gotten them yet, just stuck these on to move it around while I was building it. They are the right size, just not really into mud grips for the T ........

Body:
Still not done yet. Got a lot to do. The body was new but is going to require a lot of work to get it ready for paint. I got it from Spirit Industries in Mountain Home Ark. The track T Nose is from Speedway and I still haven't gotten the Grill for it yet. Maybe this Christmas.......I'm not looking foward to the body work............Still thinking about that article I read about the guy that painted his car with a roller........sanded it out and buffed it and it really looked good........?????

Interioir:
I am still working on the wood for the interior. There again, I have done it all myself, and plan to do the upholstery as well. (me and the wife) It might not come out looking great, but maybe it will be reasonably comfortable.

Lifestyles:
Build-It, Drive-It

Comments:

Only registered members can leave comments

Alfry

June 7, 2015 09:36

Nice bucket. Thanks for posting all the pics. By the way, I tried the paint roller bit some years back on a dirt car. Looked great on the back stretch doing 90. Close ups.....eh.

two2fastforu

February 14, 2010 06:39

Hey Dunk, Nice car. Looks like you did some great work. How did your Mr. G fuel pump work. I had trouble with one, but it was pumping diesel.

pikesan

November 24, 2007 08:56

Dunk,
You did a really nice job on this. Our cars are so similar. Keep us posted on the progress.