_105_105.webp)
As the car goes back together, we’re finding little things that we’ve wanted to get done which have made their way to the bottom of the proverbial pile. We had talked a long time ago about making some sleeves so we could put 3/8″ button head bolts in the spreader bar holes instead of the 1/2″ bolts that came with the spreader bar. The thought was brought up again during reassembly, and instead of trying to machine some spacer/ washers so the 3/8″ bolt wouldn’t be sloppy in the 1/2″ hole, I made a pilgrimage to the lathe and removed some metal. Here’s the result - a smaller, thinner head. This is a before/after shot, with the before bolt in hole on the right.
