Subaru WRX Performance Mod Sup?  Time to update you all on Project Subyrod, my 2002 Subaru Impreza WRX.  I was getting really excited for Speed Week 2010, the Nugget Cruise in and everything that goes with being at Bonneville.  For Subyrod's first trip to the Salt Flats, I felt an itch to have a custom axle back exhaust made for it, something that would turn some heads, maybe make my car fit in with all the old iron running around with loud exhausts.  It had to be on a budget.  I kicked around the idea and then dropped in at JDM Legends (See my Introduction Story of JDM Legends here) to see what Eric Bizek could weld up for me on a small budget. Take a look at some in-process photos below of the custom exhaust work.  I was thinking of a few options, mild steel painted or stainless and 2.5" or 3".  We ended up going with stainless 3" dia. tubing to match the rest of the exhaust system.  One way to achieve my budget was using some of Eric's stainless scrap pieces laying around. Here's Eric Bizek of JDM Legends...

Ford Falcon Wagon Wheels Choice It's been a long journey. I'm rebuilding/restoring/modifying (choose what you like) my 1963 Falcon Wagon. I'm way over due on what's been done, but here's where it is now:     OK, fine, the car's been sitting around way too much waiting for me to get off my butt. I'm kinda off now, but not completely. Thanks to buddies here in town helping me "get off the computer!" and back into the garage there's been some progress. All that'll have to wait. For now, I just wanna ask a question.     Which cap?   At the LA Roadster Show, I found the Cal Custom spider caps on the left along with some Cal Custom trim rings, both still in the original, well worn box. Do you know the ones that fit on the inner ring of the wheel where a dog dish hubcap would fit? I've heard them called "Toby Rings" since a guy named Toby was the first to run'm. I don't know...  I later found the two-legged spinner caps on the right, also from Cal Custom on Ebay. Both of these...

They say distance makes the heart grow fonder. Since Stude's spent the past 3 months suntanning her metal in the Mojave sun outside Gene Winfield's shop...I've grown fonder then ever. The great news is (drum-roll please,) she's back on the road!!! Not only is she back, she's running better than ever! Replacing the transmission was the biggest job that needed to be done. Saving money and finding the right transmission is what took the bulk of the time. Luckily I had good friends and lots of help through the process...thanks to all who were involved! I ended up having a great guy, Rick Annis in Phoenix, AZ, rebuild a 700R4 for me. Then my car club pal, Lori, and I took the 700R4 up to Mojave to meet Stude. Up at Gene's we got a lot of help from Bart putting it in. With Bart having a lot of experience in engine tuning he wouldn't let my car out of his sight with just a new transmission - so we worked on getting Stude's little 383 small block up to par also. The first weekend we did a lot...

I've known for awhile that I needed to change the spark plugs in my Studebaker. But I'd heard things. Things like you could break the plug inside your motor if you did it wrong and to be sure to tighten the plugs to the correct tension. So although I knew they should be changed, I was scared to do it on my own, and my spark plugs in there were working...right??? As I'm learning, I'm seeing that spark plugs (although they don't cost much and are small little things) are a major, MAJOR component of your engine. Without 'em, your engine wouldn't run. Without 'em working at their best, your engine won't run at its best. So as part of last weekend's wrenching adventure up at Gene Winfield's in Mojave, I changed my spark plugs...for the very first time! Gasp! The fellow at the local parts store recommended Autolite over ACDelco plugs which I had been running (What do you think? Leave a comment below!) I was surprised, and a little confused, when he informed me the gap for my application was .052. What?!? While perhaps some people just throw...

What is a Highboy Hot Rod or Highboy Roadster? As I journey along in the car world, little by little I'm learning. From mechanical issues to car culture history to just plain cars. Recently, while at the LA Roadster Show, I was able to learn a little about all three! It all started with the question "What makes a roadster a roadster?" To help me answer that question I enrolled Lynn Houchin, longtime LA Roadster Club Member, to be my guide. He answered all of my questions (and was able to point out examples!) about important distinctions surrounding roadsters including the big questions: What is a Model A? What is a Model T? What is a Highboy? What is a coupe, phaeton, tudor, and more! Read on to get schooled! First things first – What defines a roadster? Sure, I know its got something to do with having a removable top... but that same definition would also define a convertible so there must be more to it than that. So here it is, two simple things. A roadster must have removable windshield posts, one that is not one with...

How to Find Classic Car Insurance Photo by Ron Ricci Are you one of those people that never has anything bad happen? If so, you may not care about this info. The rest of us need classic car insurance. Once a year, you get a letter from your classic car insurance carrier saying it's time to renew. For the last several years, I wrote the check. For me, it was less than $200 and since I'd never used it, it was working just fine!  Trouble is, since I got my roadster upholstery done, I really wanted to increase the the agreed-on value. That's when I found Condon & Skelly. I needed new insurance and they needed to find new ways to get the word out about their insurance products. Condon & Skelly advertises here now, but that happened AFTER purchasing my new insurance. Why change insurance? For me, it was simple: I got the higher value for my roadster I wanted, no questions asked I got better insurance coverage overall Coverage went from $100k to $500k Same deductible Price went down by $10! Finally, I received great service! I...

Saying that there was a hole in my muffler would be an understatement. My muffler was torn up! This happened from years of scrapping over bumps. Me being the car-learning girl that I am, I thought “muffler…that just quiets noise, right?” Wrong! When it comes to mufflers, there’s much more than meets the ear. Follow along with me as I not only learn about and change my mufflers…but actually get to make a pair of custom glass-pack mufflers! When we’re talking about mufflers, we’re talking about part of the car’s exhaust system. One thing exhaust systems do is carry the fumes created by the engine’s combustion out of the engine. But what makes exhaust systems so important is that the way in which those fumes are carried out affects the pressure (a.k.a. backpressure) of the engine. And backpressure has everything to do with the performance of the engine. When choosing a muffler, it’s not only the muffler but the entire car and exhaust to take into consideration. A few things to think about are: Engine size Level and pitch of sound desired Pipe size Ground clearance While I was...

So, if you missed Part 1, The Tear Down, read that first, then come back for this, Part 2: The Install.  So, at the end of Part 1, we had removed the old ring and pinion.   Now we're ready to install the Ford Racing 3.73 ring and pinion gear set from AmericanMuscle.com. First, I wanted to show you what the Ford Racing 3.73 Gear Set comes with.  Ring gear, check.  Pinion gear check.  Crush sleeve, nut and shims, check, check and check.  But remember, its SUPER DUPER HIGHLY recommended that you ditch this crush sleeve and get yourself the Shim Spacer Pack for easier preload setup.  You'll thank yourself later, trust me. OK with Ford OEM/Racing gears i have found that they are pretty much ground on the same centerlines. So if you measure the pinion and shim after you've removed the pinion bearing and match the length to your new gears by adding the correct shim to equal the first measurement, you will be very close.  Now that being said, I always have to check the gear pattern and add or subtract shims to get the gear pattern correct. it is recomended to...

One of the first hot rod tricks a hot street car gets is a set of gears.  If your 'Stang's 8.8 inch rearend came from Ford with a set of 3.08's or even worse, 2.73's, the car was pretty much a DOG!  A set of 3.73's, 3.90's or even 4.10's really wakes 'em up.  Don't throw away those 2.73's though, you may wanna go for a run down the Salt.  haha Here is "Calera Kid" himself doing a burnout at the now defunct L.A.C.R. drag strip.  This was taken at the "Hang Over Nationals" in 2002.  Anyone ever hit the Hang Overs at Palmdale? "Sally" has run a best time of 12.85 seconds at 106mph at Famoso with 4.10's.  Eventually the plan is to replace the stock ported E7 heads for the GT40P heads and the stock cam with a higher lift unit.  For now, a set of Ford Racing 3.73 ratio Ring and Pinion from AmericanMuscle.com might allow the low revving stock head/cam "five oh" motor to utilize the good torque with a set of 3.73's. If you're a "do it yourself" hot rodder, here's the step by step instructions for the swap.  Part 1 will focus on the...

I can't let another day go by without sharing about my amazing past weekend! Yes, I was at Gene Winfield's. Yes, I learned a gazillion metalworking tips from a legend. Yes, I even did my very first burnout. Let me start at the beginning though... Early Saturday morning I stumble out of bed, grab a cup of coffee, and jump in Stude for the hour and a half drive up to Mojave, CA. My Dad makes the trek there from Vegas and we meet at Roadhouse Mikes - just the sort of greasy spoon you'd expect in a small desert town. With full bellies we head eight miles down the road to Gene Winfield's. We're signed up for Gene's bi-yearly metalworking workshop. By 9 o'clock Gene is busy acquainting all 10 participants with the various tools around his shop. Among the tools are a slip roll,  english wheel, beverly shears, pipe anvil, bead roller, and dozens of hammers, dollys, and dies. Soon Gene is fully absorbed into teaching us about various metals, chopping customs, gas welding, breaking an edge, and hammer forming metal. (You'll have to come back for how-to articles!)...

I'm a car guy, not a web guy.   Yes, I've spent the last 3 years making MyRideisMe.com and spending a huge portion of my limited free time on the computer, but it's all been worth it. The community's growing, sponsorship is growing and that means there'll be more free stuff (see the freebies stories) and more content for everyone to enjoy.   That said, I had to spend some time in the garage this weekend to prove to myself, I am a car guy. My 1963 Falcon wagon's been neglected so that MyRideisMe.com's not. I've had a new radiator to put in for a while now and I have an Optima Battery to put in as well. My new yellow top's still waiting, but at least I've got the radiator in!     Why'd it take me so long? It was a hard day's work, but not as bad as I thought it would be. I have this tendency to over think to the point where it keeps me from getting started. Maybe that's how I'm wired as an engineer. I'm pretty happy with how it turned out....

One of the most important things about TIG welding (I think I say that a lot - there must be a lot of important things!) is keeping things steady.  I've shot a video on keeping the filler steady so it doesn't get bumped into the tungsten and mess everything up, and now here's a video on using your hand as a sort of tripod to control your torch. I've used the writing analogy before, but here's another one: think about shooting a rifle.  You don't get a steady shot by holding the gun with both hands on the stock - the muzzle would be waving around and there would be almost no way to prevent some movement.  The best way to steady a rifle is to have some kind of support as close to the end of the muzzle as possible while still being able to fine tune your aim.  Think of a welding torch in the same way - support the torch as close to the cup as possible without burning yourself.  Of course, there will be compromises like visibility and pain.  But to produce a good weld,...