Customer service pays off. Or should I say, bad customer service doesn't pay. If you haven't seen my 1927 Ford Roadster called "Bonnie" then this may be your first time to MyRideisMe.com. In that case, WELCOME! Please stay a while and if you dig it... JOIN here. My roadster kinda odd because I run a 2.3L Ford Motor. That's right! It's a Pinto motor and I'm proud to be part of the 4 banger world. The 2.3's are easy to find, cheap to get and can be made to run hard, but that can get expensive. I wrote a bunch about modifying the 2.3L Ford Motor in my garage blog. Check it out. So trying to save a few bucks, I bought a Mallory dual point distributer. Why a dual point with all the electronic points systems out there? And why not just run a factory Ford electronic distributor? Good questions. For both cases, you often have to deal with a vacuum advance system. My motor makes poopoo vacuum. (does that rhyme?) and those vacuum modulators don't look good. Also, most of the electronic setups are big bucks. Dual...

It's no wonder there are a ton of 2.3 engines out there making power. They're one of the top engines for Ministock racing, we knew that, and there's a few companies making go-fast parts for them like Esslinger (http://esslingerengineering.com/) and Racer Walsh (http://racerwalsh.zoovy.com/). We've even got a near fanatical following for the turbo 2.3's over at turboford.org. But, I had no idea folks like Dennis Wright were racing these Pinto 'bangers in hydroplanes! I met Dennis over on the HAMB board. He was responding to my post about this finned aluminum valve cover I designed. I think the market for it would be big enough to manufacture it for profit, but I'm busy working on other things, like MyRideisMe.com! Dennis wrote the info below in an email and said I could post it with a few pics. This isn't a car or a bike, but you'll see by reading, this story fits: My Ride is Me. The 2.5L stock class boats have the letter "S" designation with the boat number. Most "S" boats these days use the Ford 2300. The motors are basically the pure stock version of the...

In addition to the sleek new set of 26x10" wheels and tires from Dubs, I'll also be installing a new LT1 fuel injected crate motor to replace the pinto power! Check out these new rims! (They make spinners look like 13"Centerlines!) Gonna be ROLLIN baby!! go back Oh, and APRIL FOOLS! (did I get'cha? Please leave a comment) (MyRideisMe.com is not receiving advertising money from Dubs, I just thought this was outrageous and a good prank for April...

I'm not sure when I started working on this project, but it was at least 4 years ago. I wanted to build a trick intake setup for my Pinto Powered Roadster called Bonnie. Bonnie's always turned heads, even parked next to MUCH higher dollar rods. I have to admit that I like that. The intake design is from a tech article I read from the Inglese website. It explains why individual runner intakes and weber carbs are the hot setup. Now, with the new intake finally on, I'm gonna get more people asking, "What engine is that?" So here's where I left off... the last thing to do was weld the flange that would hold the throttle cable: My Friend Aaron welded everything up for me. It came out nice, then I took it to the sand blast cabinet. After, it looked like cast aluminum, but it weighs less than 3 lbs. These are the before and after blasting shots. Then finally, here's what it looks like all mounted up. I can't wait to spend hours trying to tune this thing! But, I'm gonna wait to fire it up...

Some how while trying to make this website and taking care of my family, I'm also working on my Pinto Powered 27 Ford Roadster, "Bonnie". I thought I'd update everyone on the progress. I'm doing this so that all of the 230 users of My Ride is Me will do the same! We're talking to our web designer about how to show EVERYONE's blogs all in one place. That way, we can all keep up with what's new. First off, here's the car... if you haven't seen it yet, I haven't done enough self promotion! (hardly possible) This is what it looked like before the 2006 Goodguy's show. That red paint you see on the header is GONE (as soon as it got hot!) and the car hasn't been that clean since! Plus, the paint (primer really) had faded here and there unevenly, so here's what I'm trying to finish before the show: 1) Custom dual Weber 44 IDF carbs. Here's a few pics: The idea here is best said by the guys at Inglese: Weber-carbureted engine to idle smoother, have a slicker "feel" to it a low speeds...